Home > Cleaners >

1 Liter Cement Remover Descaling Agent
Tenax Cement Remover 1 Liter


 
Alternative Views:


Distributors With Direct Website Links

Tenax has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-583-1173 for assistance. Or, you can find this product online at the above distributor websites:

Tenax USA Price: $15.00
 

Water-based Scented Descaling Liquid Cement Remover


 

This cleaning solution is formulated for general purpose cleaning and removes a number of substances including rust, traces of paint, mineral deposits, and cement resid...




Product Code: 1MAACEMENTREMOVER
Qty:

Description Technical Information Sildes/Video(s)
 

Cement Remover Acid Descaling Detergent

Tenax Cement Remover is a water-based descaling detergent that removes dirt such as joint residues, rust, traces of wall painting, mineral deposits. Excellent degreaser.

  • Pleasantly scented
  • Does not contain hydrochloric acid
  • Does not attack cement joints
  • Does not emit corrosive fumes for metals
  • Concentrated, to be diluted with water
  • Ideal for indoor and outdoor use

General Purpose Cleaning

Cement Remover can be used as a high powered cleaner on a variety of materials, as long as they are acid resistant When it is diluted to the proper strength, it can be used to clean dirt and residue from the following surfaces:

  • Acid resistant stones
  • Clinker gres
  • Cotto
  • Glazed ceramics
  • Cement*

*Cements: Always work with the surface saturated with water. Carefully consider the product concentration and contact times for the porosity of the cement and limestone layer to be removed.


pH Level

0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
pH2 - Acid

INSTRUCTIONS FOR USE:

Remove excess loose dirt. Protect anything that may be damaged by acid splashes. If the surface is very absorbent it should be well moistened with water before starting work. Apply the diluted product on the surface using a brush or sponge. Leave on for recommended time (at least 2-3 minutes) depending on the type of dirt to be removed; after a maximum of 30 minutes rinse with water. In case of very stubborn dirt repeat the treatment in the same manner. The product can be applied using a cleaning machine (single-brush or scrubber)

Cement Remover Water Mix Ratios:

  • Stainless steel and ceramic: solution 1-3% (10/30 grams per liter of water)
  • Terracotta and Klinker: 3-6% solution (30/60 grams per liter of water)

Caution:

Do not use in combination with detergents containing hypochlorite. Do not use on marble and other acid sensitive surfaces, may cause corrosion and irreversible opacity. When a surface is treated for the first we suggest testing the product on a small hidden area.

Safety Rules:

Read the information on the safety data sheet and the instructions on the package/can before use.

Warnings:

  • Keep out of the reach of children.
  • Avoid contact with the eyes and skin.
  • Do not mix with other substances.

Shelf life

The product will last at least 12 months in normal condition, kept away from heat, humidity and sunlight. Close the package after usage.

Additional Information

Share your knowledge of this product. Be the first to write a review »