Home > Cleaners >

250 ML Quartz ExtraClean Pro
Extraclean Pro Vacuum Cup Ring Remover 1MPC00BG40


 
Alternative Views:


Distributors With Direct Website Links

Tenax has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-583-1173 for assistance. Or, you can find this product online at the above distributor websites:

Tenax USA Price: $17.08
 

 

 

Quartz Grease and Oil Remover Surface Treatment


 

250 ML container of cleaner formulated for removing the rings left from suction cups attached to slab handling and moving equipment used during the production process o...




Product Code: 1MPC00BG40
Qty:

Description Technical Information Sildes/Video(s)
 

250 ML Quartz Extraclean Pro

Remove those vacuum rings from your quartz slabs with Extraclean Pro. This 250 ML container of solvent based cleaner is designed for removing greasy suction cup rings from quartz slabs. Extraclean Pro penetrates the pores of the material to remove grease that can make its way into the quartz. These rings can be difficult to remove without a product designed specifically for the purpose of eliminating these kinds of discolorations.

Suction Cups & Vacuum Rings

Slab handling equipment makes moving quartz and engineered stone slabs a piece of cake. however, these machines leave their mark on the slab. 1 qt. Extraclean Pro suction cup and vacuum ring remover is made to get into the pores of the slab and remove those unwanted greasy circles that are left by the machines.

Coverage

One quart of Extraclean Pro covers approximately 200-300 square feet of material.

How to Use

Using 250 ML Extraclean Pro is easy. Just pour the product directly on a clean cloth and rub the remover onto the slab in the location of the ring. For stronger marks you may have to apply Extraclean Pro 250 ML vacuum ring remover directly to the slab. If applying directly to the slab, distribute the Extraclean Pro evenly with a clean cloth and leave it for 1-2 minutes. After 1 or 3 minutes, rub with the same cloth in a circular motion until the marks are removed. In cases where the problem persists, you may have to reapply with a longer waiting time.

Standard Application for Ring Removal

  1. Pour Extraclean Pro 250 ML Directly On A Clean, Soft Cloth
  2. Rub the Area of the Stone With the Ring Until the Ring is Gone

For Tougher Suction Cup Rings

  1. Pour Extraclean Pro 250 MLz Directly On the Slab
  2. Distribute Evenly Over the Slab
  3. Wait 1 to 2 Minutes
  4. Wipe Area With the Same Cloth

For Persistent Vacuum Rings

  1. Pour Extraclean Pro 250 MLz Directly On the Slab
  2. Distribute Evenly Over the Slab
  3. Wait Longer Than 1 to 2 Minutes
  4. Wipe Area With the Same Cloth
Additional Information

Share your knowledge of this product. Be the first to write a review »