Home > Lapitec Products >

Artico Strongbond Glue Cartridge
Artico StrongBond Glue Cartridge


 
Alternative Views:


Distributors With Direct Website Links

Tenax has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-583-1173 for assistance. Or, you can find this product online at the above distributor websites:

 

Cartridge Adhesives for Artico Lapitec Surfaces


 

Artico StrongBond cartridges are indoor, outdoor glue products that are color matched to use with Lapitec Artico and Arabescato Michelangelo....




Product Code: M2HARTICO
 

Description Technical Information Sildes/Video(s)
 

Artico StrongBond 215ML Glue Cartridge

Artico StrongBond is designed to match the Lapitec Artico material. Other colors Artico color matches with include: Arabescato Michelangelo and if Tenax is out of Artico then the Glaxs color Ice - P will be substituted in its place.

StrongBond is a new generation bi-component glue for gluing Lapitec. It has zero yellowing and is UV stable to the sun.The StrongBond Artico comes in a 215 ml cartridge for fast and easy dispensing and use.

Solvent free, with medium reactivity. It has a good hardness and can cure at 32°F. The glue hardened is bright also when the level of humidity is high and the temperature is low.

Requires use of special M200XMR Cartridge Gun or the Tenax 2:1 Cartridge Gun.

Adhesive Product Substitutions

If Tenax is out of Artico StrongBond we will substitute with Ice - P.

Directions for Use:

All surfaces must be cleaned and free of dust and grease. When applying to a polished or glossy surface it is advised to scrub the surface with sandpaper before gluing. Remove cap and attach the special threaded mixing nozzle. Squeeze out about 6" of product before applying to surface. Clean the nozzle after use, replace the cap and discard the mixing nozzle. Repeat this process at any change of mixer. Product will not set below 32°.

Shelf Life:

The product in the cartridge will last at least 6 months if stored between 65° and 77°. Keep away from sunlight, heat and humidity.

Safety:

Please read the safety data sheet before use and follow the product instructions.


Artico StrongBond Glue Cartridge Compatibility



Artico Compatible Tips

Tips for this Cartridge

The following tips are compatible with this cartridge:

Artico Compatible Guns

Guns for this Cartridge

The following guns are compatible with this cartridge:

Additional Information

Share your knowledge of this product. Be the first to write a review »