Tenax has distributors across the USA. Please email us at firstname.lastname@example.org with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-583-1173 for assistance. Or, you can find this product online at the above distributor websites.
Tenax StrongEdge EXPRESS, the strongest clear, epoxy specifically designed for fabrication and lamination. Once applied on a countertop, the stone or substrate will not delaminate or break where Tenax StrongEdge EXPRESS has been applied! StrongEdge EXPRESS is the clearest epoxy on the market. Tenax StrongEdge EXPRESS does not shrink, it takes a polish, as well as accepts color to color match the stone if necessary. With a 2:1 mix ratio and a set time of about 40 minutes at 75 degrees, Tenax StrongEdge EXPRESS maintains the clearest epoxy with an express cure time, without losing its structural integrity.
Make sure the surface to be treated is dry, clean and free of dust. Mixing ratio of resin to catalyst is 2:1 (see chart in the TDS tab). Use clean tools. Stir vigorously and apply. Do not place unused product back in can. Make sure the cans are sealed tightly after use. To clean tools we suggest light solvents like acetone and butyl acetate.
Keep the can can closed after using. This product will last at least 1 year under normal conditions between 65° and 77°. Keep away from heat, humidity and sun light.
Please read the safety data sheet before use and follow the product instructions.
The information in the following table of data is also available in a printable Portable Document Format (PDF) file. This file can be downloaded or printed by clicking the button at the bottom of the table.