Home > Cartridge Glue > Ceramic >

Lunar Grey Powerbond 215 ML Cartridge
Lunar Grey Powerbond 215 ML Cartridge


 
Availability

Product Code: 1RGLAXSPOWERLG

Description Technical Specs TDS
 

Lunar Grey 215 ML Tenax Powerbond 2:1 Cartridge Glue

High adhesion system for indoor and outdoor bonding of ceramic, porcelain and similar surfaces. Available in a wide variety of colors. Requires use of special M200XMR Cartridge Gun.

Advantages:

  • VOC free
  • Excellent adhesion
  • Ultra rapid
  • Excellent color stability to sunlight
  • Glossy, shiny and easy to polish
  • Indoor and Outdoor use
  • Pre-dosed for easy dispensing
  • Comes with 2 mixing nozzles

Instructions for Use:

  1. All the surfaces to be treated must be cleaned and free of dust and grease.
  2. In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
  3. Remove the threaded extremity and uncap the cartridge.
  4. Fix the mixer to the cartridge through the threaded nozzle.
  5. Before applying the glue on the surfaces, do spurge around 5 gr in line.
  6. Use only guns approved by TENAX, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
  7. After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.

Shelf Life:

The products in cartridge will last at least 12 months, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.

Safety Rules:

Resin and hardener are chemical products, please read the safety data sheet before usage and the rules written on the product label.

Powerbond Color Chart:


Share your knowledge of this product. Be the first to write a review »