Home > Stone Color Enhancer >

Quartz Toner 1LT
Tenax Quartz Toner Stone Color Enhancer Part # 1MPA00BG501


 
Alternative Views:


Availability

Product Code: 1MPA00BG501
 

Description TDS
 
Tenax Quartz Toner Stone Color Enhancer

Tenax Quartz Toner is a surface treatment that can be used to enhance Quartz, Engineered, and agglomerate stones.
Both for indoor and outdoor application.
Perfect for bringing out a deep rich color in quartz and engineered stone.
Works excellent for matching the edge of the stone with the surface polish.
May be applied on polished, flamed, rough, sanded, honed, and brushed finishes.
Works well to disguise small scratches.
Quartz Toner is also suitable to protect surfaces against oil and water.
The product does not change color when exposed to the sun.
Quartz Toner works as both a stone color enhancer AND a premium grade high quality sealer.

Excellent for counter tops because it is approved for food contact in compliance with the European rule 90/128 ECC.

1 Liter covers approximately 215-300 sq feet

Directions:
Apply product to a completely clean and dry surface. Spread the product using a brush, cloth, sponge or spray gun. Apply as much product as the material can absorb. After a few seconds clean (buff) the surface with a cloth to avoid the formation of glossy and sticky films. Repeat after 10-15 minutes. If using on the floor do not walk on the surface for 24 hours.

Important: Test product on small, hidden area before use.

Shelf Life:
This product will last at least 2 years if kept between 65° and 77°. Keep away from heat, humidity and sunlight.

Please read Safety data sheet before usage.
Quartz Toner on Black Quartz Stone
Tenax Quartz Toner on Light Engineered Stone

Share your knowledge of this product. Be the first to write a review »