Bianco Assoluto StrongBond 215ML Cartridge Glue

Bianco Assoluto StrongBond is designed to match the Lapitec Bianco Assoluto material. Other colors Bianco Assoluto color matches with include: Vittoria, Aurora, Venere, Elettra and if Tenax is out of Bianco Assoluto then the Glaxs color Pure White will be substituted in its place.

StrongBond is a new generation bi-component glue for gluing Lapitec. It has zero yellowing and is UV stable to the sun.The StrongBond Bianco Assoluto comes in a 215 ml cartridge for fast and easy dispensing and use.

Solvent free, with medium reactivity. It has a good hardness and can cure at 32°F. The glue hardened is bright also when the level of humidity is high and the temperature is low.

Requires use of special M200XMR Cartridge Gun or the Tenax 2:1 Cartridge Gun.

Adhesive Product Substitutions

If Tenax is out of Bianco Assoluto StrongBond we will substitute with Pure White.

Directions for Use:

All surfaces must be cleaned and free of dust and grease. When applying to a polished or glossy surface it is advised to scrub the surface with sandpaper before gluing. Remove cap and attach the special threaded mixing nozzle. Squeeze out about 6" of product before applying to surface. Clean the nozzle after use, replace the cap and discard the mixing nozzle. Repeat this process at any change of mixer. Product will not set below 32°.

Shelf Life:

The product in the cartridge will last at least 6 months if stored between 65° and 77°. Keep away from sunlight, heat and humidity.

Safety:

Please read the safety data sheet before use and follow the product instructions.