Tenax Concrete H20 Proof 1 liter
Tenax Concrete H20 Proof is a waterproof, water-based product used to protect concrete from water and water soluble dirt. Helps to maintain the surface and protect and protect against mold and algae. Keeps the treated material looking new. It will not form a film and will not change the color of the material. Recommended for indoor and outdoor surfaces.
- Preserves the natural look of concrete
- Ideal for concrete and brick
- Helps to keep the surface clean and free of algae and mold
- Water repellent
- Water-based/non-solvent formulation
Instructions for use:
Make sure the surface to be treated is dry and clean. The presence of water, dust or dirt may effect the result regarding the uniformity of the surface. Spread the product using a brush, sponge, cloth or spray gun.Use the right quantity that the material can naturally absorb.
It is suggested to repeat this treatment at least two times after 10-15 minutes from the first application. The water repellency effect will be achieved after 48 hours. If using on a floor, do not walk on the surface for at least 24 hours.
Always test the product on a small hidden area first.
Close product tightly after use.
Temperature for application: 50° - 86°
1 Liter will treat 54 - 323 square feet depending on the porosity of the material.
Keep away from heat, humidity and sun. Product will last at least 1 years if kept between 65°F - 77°F. Use product within 6 months after opening.
Please read the safety data sheet before using.