Home > Info > Testing & Case Studies > Edge Wheels > Marmo Meccanica 511

6" Wheels for Marmo Meccanica 511 Polisher

This test was done on a Marmo Meccanica 511 polishing machine using 6" flat polishing wheels. The machine has 7 polishing heads.

The test sequence and settings are as follows:

  • Sequence:
    • Metal Diamond
    • 120 6" Flat Polishing Wheel
    • 220 6" Flat Polishing Wheel
    • 400 6" Flat Polishing Wheel
    • 800 6" Bullnose Polishing Wheel
    • 1200 6"Bullnose Polishing Wheel
    • 3000 6"Bullnose Polishing Wheel
  • Pressure: 2 1/2 Bars

Initial Test Results

Multiple materials were polished during this test session. Both granite and engineered stone were polished. The results were good.