1 Quart Quartz Extraclean Pro
Remove those vacuum rings from your quartz slabs with Extraclean Pro. This 1 quart container of solvent based cleaner is designed for removing greasy suction cup rings from quartz slabs. Extraclean Pro penetrates the pores of the material to remove grease that can make its way into the quartz. These rings can be difficult to remove without a product designed specifically for the purpose of eliminating these kinds of discolorations.
Suction Cups & Vacuum Rings
Slab handling equipment makes moving quartz and engineered stone slabs a piece of cake. however, these machines leave their mark on the slab. 1 qt. Extraclean Pro suction cup and vacuum ring remover is made to get into the pores of the slab and remove those unwanted greasy circles that are left by the machines.
Coverage
One quart of Extraclean Pro covers approximately 200-300 square feet of material.
How to Use
Using 1 Quart Extraclean Pro is easy. Just pour the product directly on a clean cloth and rub the remover onto the slab in the location of the ring. For stronger marks you may have to apply Extraclean Pro 1 Quart vacuum ring remover directly to the slab. If applying directly to the slab, distribute the Extraclean Pro evenly with a clean cloth and leave it for 1-2 minutes. After 1 or 3 minutes, rub with the same cloth in a circular motion until the marks are removed. In cases where the problem persists, you may have to reapply with a longer waiting time.
Standard Application for Ring Removal
- Pour Extraclean Pro 1 Quart Directly On A Clean, Soft Cloth
- Rub the Area of the Stone With the Ring Until the Ring is Gone
For Tougher Suction Cup Rings
- Pour Extraclean Pro 1 Quartz Directly On the Slab
- Distribute Evenly Over the Slab
- Wait 1 to 2 Minutes
- Wipe Area With the Same Cloth
For Persistent Vacuum Rings
- Pour Extraclean Pro 1 Quartz Directly On the Slab
- Distribute Evenly Over the Slab
- Wait Longer Than 1 to 2 Minutes
- Wipe Area With the Same Cloth