Black Natural Stone Color Matching Liquid Dye

Tenax Tepox Q Color Match System - Black 1 Liter

Tepox Q Black is a special chemical color liquid used to color match stones that have been resined with color additives. Tepox Q may also be used to enhance slabs or to alter the look of a slab for specific applications Use a single color or mix multiple colors together to acheive the desired effect. Tepox Q is designed to be used in conjunction with Ager or Ager Tiger. It is also recommended to follow up with Tenax Proseal or Tenax Protex premium grade sealers. Tepox Q is for indoor and outdoor use.

Directions:

1. Bring the stone to a 400 grit polish
2. Dry the stone. The stone should be as dry as possible to allow as much penetration of the Tenax products as possible.
3. Apply Tepox Q directly to the stone. Do not dilute. Apply full strength.
4. Allow the Tepox Q to completely dry. This can be force dried, by a heat gun, or it can be allowed to dry naturally.
5. After the stone is dried, apply Tenax Ager over the Tepox Q
6. Allow the Ager to completely dry. Again, this can be force dried or allowed to dry naturally
7. Finish polishing the stone. We recommend the Weha 3 Step polishing pads
8. Force dry or allow the stone to completely dry.
9. Apply Tepox Q to the stone to fill in the newly exposed pores from the polishing process. Work with the Tepox Q until the color is matched to the desired look.
10. Force dry or allow the Tepox Q to dry completely
11. Apply Ager as directed over the Tepox Q and completely dry.
12. Finish with Tenax Proseal - Ultra premium sealer to fully lock in the Tepox Q.

Shelf Life:

This product will last at least 12 months if kept between 65° and 77°. Keep away from heat, humidity and sunlight.

Please read Safety data sheet before usage.