Home > Adhesives > Polyester Glue > Travertine >

Travertine Filler 4 LT
Part # 14AC01BJ10 Tenax Travertine Filler Semisolid 4 Liter


 
Alternative Views:
Product Characteristics
Product Characteristics:

Availability

Product Code: 14AC01BJ10
 

Description Technical Information TDS
 
Tenax Travertine Filler Semisolid 4 Liter
Tenax Travertine filler is used to horizontally repair, rebuild, glue, and fill travertine, as well as similar stones. Tenax Travertine filler is a semisolid consistency that is smooth and easy to spread. It is used to fill all size holes in travertine and will accept a polish. Not suitable for temperatures below 32°. Recommended for interior use. Other colors available upon special request.

Instructions for use:
Make sure surface to be treated is dry, clean and free of dust. If adding coloring paste do so before mixing with catalyst. An excess of coloring paste may affect the final product so use caution. Mix the catalyst with glue at 2-3% in weight (see chart below). Stir vigorously and apply. Apply a slight excess to account for shrinkage. Let the filler dry until the excess can cut off with a razor blade. Remove leftover traces with acetone. Do not place unused product back in can. Make sure can is sealed tightly after use.

25°C = 77°

Shelf Life:
Keep away from heat, humidity and sun. Product will last at least 6 months if kept between 65° - 77°.

Safety:
Please read the safety data sheet before using.
tenax Travertine Filler and Clear Resin

Share your knowledge of this product. Be the first to write a review »