Home > Stone Sealers & Concrete Sealer >

Ager 200 LT
Tenax Ager Color Enhancing Sealer 200 Liter Part # 1MPA00BG90


 
Alternative Views:


Availability

Product Code: 1MPA00BG90
 

Description TDS
 

200 Liter Wet Look Natural Stone Sealer & Enhancer

Tenax 200 Liter Ager is one available size of the stone enhancers and sealers that revitalize and enhances the color of natural stone surfaces. Use the 200 Liter ager on your natural stone surfaces to give the stone a deep, rich appearance and protect the pores from absorbing potentially discoloring liquids that could stain the surface.

200 Liter Ager Technical Information

Ager is a solvent based product That performs two main functions on natural stone surfaces. First, it protects all sorts of natural stone materials from absorbing liquids that could mar the appearance of the stone. Second, Ager enhances the natural color and grain of the material to which it is applied. Additionally, Tenax Ager helps protect natural stone against graffiti.

How to Apply

Using a paintbrush, cloth, fleece, or sponge applicator, apply Tenax Ager undiluted to a completely clean and dry natural stone surface. Allow the material to naturally absorb the Ager evenly. Within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth or sponge. Avoid applying Ager in direct sunlight. Wait 24 hours after treatment for finished surface. In the case of treating natural stone surfaces that receive foot traffic, do not walk on treated surface for 4-6 hours after treatment.

Benefits of Ager

Adding Ager to natural stone surfaces produces benefits and adds beauty to the stone. The following list enumerates some of the benefits of applying Ager to natural surfaces:

  • UV Resistant
  • Non Yellowing
  • Stain Resistant
  • Enhances Color Tone
  • Helps Protects Against Graffiti

Material Compatability

Tenax Ager is a color and grain enhancer and sealer designed for adding beauty to all sorts of natural stone surfaces including the following materials:

  • Marble
  • Granite
  • Limestone
  • Sandstone
  • Quartzite
  • Travertine
  • Agglomerate
  • Rosso Verona

Technial Information

  • Density at 25°C gr/cm2: 0.95
  • Appearance: Opalescent Liquid
  • Color: Colorless

WARNING: Tenax Ager does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomatoes, citrus, coffee, etc. will etch the surface by creating a chemical reaction with eh calcium carbonate present in marbles. For etching problems use Tenax TeEtch.

200 Liter Ager Coverage

The consumption greatly depends on the porosity of the material being treated. Each type of natural stone varies in porosity. Additionally, stones vary in porosity even if they are the same type. The following list gives some general coverage guidelines for some stone.

200 Liter of Product Coverage
Material Approximate Coverage Approximate Coverage
Honed Stone & Marble 3,800-660 m2 40,600-71,200 ft2
Polished Marble & Granite 5,600-9,400 m2 61,000-101,800 ft2
1 Liter of Product Coverage
Material Approximate Coverage Approximate Coverage
Honed Stone & Marble 20-35 m2 215-376 ft2
Polished Marble & Granite 30-50 m2 323-538 ft2
WARNING: Ager does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomato, citrus, coffee, etc. will etch the surface by creating a chemical reaction with the calcium carbonate present in marbles. For etching problems please use Etch Remover.

Video Demonstrations


Share your knowledge of this product. Be the first to write a review »