Home > Cartridge Glue > Dekton Mastidek >

Cd Mastidek Fast Outdoor Cartridge Glue Korus 50 Ml
Consentino Dekton Mastidek Fast Outdoor Cartridge Glue Korus 50 ml
 

Distributors With Direct Website Links

Tenax has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-583-1173 for assistance. Or, you can find this product online at the above distributor websites:

Tenax USA Price: $26.76
 

Dekton Glue Fast Outdoor Cartridge for Korus


 

Korus Small 50ml Mastidek outdoor cartridge for use on the DEKTON® material with the same name....




Product Code: M5HKORUS
Qty:

Description Technical & Safety Videos
 

Consentino Dekton Mastidek Cartridge Glue Korus 50 ml

For use with Dekton Korus, Blaze.

Mastidek Cartridge Glue for Cosentino Dekton is a new generation bi-component resin used to glue Dekton. Dekton Mastidek Fast Outdoor Cartridge glue has a very high adhesion in a short amount of time which allows for cutting and polishing the assembled parts in a short time...approximately 45-60 minutes. The hardened product is very shiny and is very polishable.

This product is produced in special cartridges with a 2:1 bi-axial quantity 50 ml. The glue and hardener are pre-dosed in the cartridge which, once inserted in the proper gun, with the special mixer fixed on top, allows the correct extrusion and mixing of the product. Requires use of special GB-CB-MR5012 Cartridge Gun. Suitable for outdoors.

Directions for Use:

All surfaces must be cleaned and free of dust and grease. When applying to a polished or glossy surface it is advised to scrub the surface with sandpaper before gluing. Remove cap and attach the special threaded mixing nozzle. Squeeze out about 2-3" of product before applying to surface. Clean the nozzle after use, replace the cap and discard the mixing nozzle. Repeat this process at any change of mixer. After usage, clean the nozzle, replace the cap and discard the mixer after. Product will not set below 32°.

Shelf Life:

The product in the cartridge will last at least 12 months if stored between 65° and 77°. Keep away from sunlight, heat and humidity.

Safety:

Please read the safety data sheet before use and follow the product instructions.

Additional Information

Share your knowledge of this product. Be the first to write a review »