Home > Products >

Tenax Concrete H2O Shield 1 Liter
Tenax Concrete H2O Shield 1 Liter


 
Alternative Views:


Availability

Product Code: 1MAACONH20S
 

Description Technical Specs TDS
 

Tenax Concrete H20 Shield 1 liter

Tenax Concrete H20 Shield is a water and oil proof, water-based product to protect concrete based material with high porosity. Impregnating so it will not form a film and will not change the color of the material. Penetrates into the material so it won't make surface more slippery. Contains a quantity of protective ingredients to provide top level stain repellent properties.

  • Preserves the natural look
  • Durable and long-lasting
  • Resists staining
  • Easy to use
  • Water Based/non-solvent formulation

Instructions for use:

Make sure the surface to be treated is dry and clean. The presence of water, dust or dirt may effect the result regarding the uniformity of the surface. Spread the product using a brush, sponge, cloth or spray gun.Use the right quantity that the material can naturally absorb.

It is suggested to repeat this treatment after 10-15 minutes from the first application, wet on wet. The water repellency effect will be achieved after 48 hours. If using on a floor, do not walk on the surface for at least 24 hours. For high porosity concrete, we suggest at least two coats.

IMPORTANT:

  • Always test the product on a small hidden area first.
  • Close product tightly after use.
  • Temperature for application: 50° - 86°

Coverage

1 Liter will treat 215 - 329 square feet depending on the porosity of the material.

Shelf Life:

Keep away from heat, humidity and sun. Product will last at least 1 years if kept between 65°F - 77°F. Use product within 6 months after opening.

Safety:

Please read the safety data sheet before using.


Share your knowledge of this product. Be the first to write a review »