Home > Cleaners >

Booster Alk Strong Stain Remover 1 Quart
Tenax Booster Alk, Brio Action 1 Strong Stain Remover 1 Liter Part # 1MAABRIO1

Alternative Views:

Distributors With Direct Website Links

Tenax has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-583-1173 for assistance. Or, you can find this product online at the above distributor websites:

Tenax USA Price: $30.13

Biodegradable Strong Concrete & Terra Cotta Stain Remover


Strong stain remover is a biodegradable cleaner that sanitizes as it cleans and is used for removing stains from grout in the joints and seams as well as floors and it ...

Product Code: 1MAABRIO1

Description Technical Information Sildes/Video(s)
Tenax Booster Alk Strong Stain Remover 1 Quart

Booster Alk Stain Remover and Grout Cleaner is a sanitizing, biodegradable (more than 90% biodegradable) cleaner for floors and joints. Designed to be highly effective for thorough cleansing of floors and joints with stubborn dirt that resists ordinary cleaners (old dirt, dust, cement residues, soiling caused by smog and atmospheric agents, mold, and other organic dirt). It is also a very effective sanitizer, and it is non-toxic and environmentally friendly. Booster Alk works excellent on marble, granite, ceramic, and terra-cotta. Clean up is a cinch! Because it is biodegradable, it can simply be washed down the drain!

1. Sweep up any loose dirt and clean surface to be treated.
2. Spread product generously on surface to be treated using a brush or similar equipment. The layer of product must be at least 1mm thick.
3. Leave the product on the surface depending on the degree of the stain. We recommend an average time of 30-60 minutes at 68°. In case of lighter soiling or higher temperature reduce the time to prevent product from drying. During this time the product also sanitizes the surface.
4. Rinse thoroughly with water. Depending on the roughness of the surface (smooth, brushed, etc.), the type of dirt (residues of cement, mold, etc.) it may be useful to scour with a brush while rinsing so as to remove any dissolved material from rougher surfaces.
5. Discard the solution as it has already exhausted its effectiveness and cannot be reused.
6. In case of stubborn dirt and insufficient cleansing, repeat the treatment following steps 1 thru 4
7. It is recommended to test this product on a small hidden area to determine the correct contact time. On some very shiny surfaces this cleanser may cause partial loss of shine.
8. In order to protect the surface and improve its appearance we suggest you treat the surface with a Tenax protective sealer or wax which should be applied to a completely dry surface.

Shelf Life:
This product will last at least 12 months if kept between 65° and 77°. Keep away from heat, humidity and sunlight.

Please read Safety data sheet before usage.
Additional Information

Share your knowledge of this product. Be the first to write a review »